EasyCare HoofLox Super Glue
Fast-setting super glue for positioning glue-on shoes and for minor hoof crack repairs and stabilisation.
Watch this product and we will notify you once it is back in stock.
EasyCare HoofLox Super Glue
EasyCare HoofLox Super Glue 50 g
Price per item.
EasyCare HoofLox Super Glue is a fast-setting adhesive for professional fitting of EasyCare glue-on systems. Depending on the shoe and its load requirements, it can be used to hold the shoe in position before applying urethane adhesive, or as the main adhesive in certain systems.
Two uses
1. Positioning before applying urethane adhesive
HoofLox Super Glue holds the shoe in position before the final bond is made with urethane adhesive. This keeps the shoe stable during fitting. For tab gluing, EasyCare recommends keeping the hoof wrapped for at least 10 minutes, longer in cold weather. For rapid positioning, the glue can be activated in 6–8 seconds with
HoofLox Activator.
2. The main adhesive in certain systems
In some EasyCare shoe and tab systems, HoofLox Super Glue can serve as the main adhesive for a full trimming cycle. Always choose the adhesive according to the shoe's design and the loads it needs to withstand.
Choosing an adhesive for your shoe model
EasyShoe Roller, EasyShoe Speed and EasyShoe Speed Metal Trac require a suitable gap-filling adhesive for their cuffs. Follow the shoe manufacturer's instructions when choosing an acrylic or urethane adhesive; super glue alone is not a substitute for the specified cuff adhesive.
Product information
HoofLox Super Glue is compatible with several EasyCare shoe and tab systems. For initial positioning, apply the glue to the hoof's bearing surface and spray HoofLox Activator onto the shoe. Pressing the shoe against the hoof holds it in position for the remaining gluing stages.
- Fast-setting super glue for hooves and glue-on shoes
- For temporary positioning or as the main adhesive in certain systems
- For tab gluing, keep the hoof wrapped for at least 10 minutes, longer in cold weather
- Activates in 6–8 seconds when used with HoofLox Activator
- Can be used as a top coat for sealing and added protection
- Pack size: 50 g
Directions for use
- Prepare the hoof: it must be clean, dry and lightly roughened
- Apply HoofLox Super Glue to the hoof's bearing surface
- Spray Activator onto the shoe if rapid setting is required
- Press the shoe against the hoof until the glue has set
- Continue bonding with urethane adhesive, or use the super glue as a top coat
As a top coat, the glue creates a glossy finish, further seals the tabs and helps protect the hoof from rapid changes between wet and dry conditions. Follow the shoe system's wrapping and curing instructions before turnout. Rapid positioning does not mean that the entire bonding process is complete.
Compatible shoes and systems
- Mushroom Cuffs
- 11 Finger Tabs
- Sticky Finger Tabs
- Stealth Tabs
- Versa Grip Octo
- EasyShoe 3D
- EasyShoe One Sticky
Storage and working temperature
- Optimum storage temperature: 2–10 °C
- Recommended working temperature: 18–25 °C
- Cold conditions increase curing time
- Extreme heat and cold can affect the adhesive's properties
Safety and removal
- Always wear protective gloves when gluing
- Remove adhesive from the hoof with a rasp or sanding tool
- Remove adhesive from the shoe with a Dremel, for example using a 9931 bit
