Shubond Bio-Based Adhesive
Shubond Bio-Based 150 ml is a fast-setting white hoof adhesive with low odour, a flexible bond and 25% lower heat generation.
Watch this product and we will notify you once it is back in stock.
Shubond Bio-Based Adhesive
Shubond Bio-Based Adhesive 150 ml
Price per item.
Product information
Shubond Bio-Based from Glue-U is a fast-setting, two-part acrylic adhesive for bonding horseshoes and repairing hoof walls. It bonds strongly to materials including metal, composites and plastics, and is suitable for hoof repairs, cracks and rebuilding missing hoof material.
Shubond Bio-Based has a partly bio-based formulation in which several conventional ingredients have been replaced with alternatives of natural origin. It has low odour and generates approximately 25% less heat than conventional acrylic adhesives. The semi-rigid, flexible and impact-resistant bond is designed for the mechanical stresses encountered in shoeing.
Its non-sag consistency makes application easier. Working time is approximately 2 minutes at 23 °C, and handling strength is reached after about 5–7 minutes.
Product details
- Brand: Glue-U
- Adhesive type: two-part MMA-based acrylic
- Colour: white
- Volume: 150 ml
- Mixing ratio: 10:1 by volume
- Working time: approximately 2 minutes at 23 °C
- Handling time: approximately 5–7 minutes at 23 °C
- Properties: low odour, flexible and impact-resistant bond
Benefits
- Partly bio-based formulation with several conventional ingredients replaced by alternatives of natural origin
- Approximately 25% less heat generation than conventional acrylic adhesives
- Low odour during application
- Strong adhesion with a flexible, impact-resistant bond
- Non-sag consistency for easier application and rebuilding
- Fast setting for efficient farriery work
Directions for use
- Prepare and clean the bonding surfaces according to the manufacturer's instructions.
- Apply with a compatible dispensing gun and mixing tip.
- Position and adjust the material within the working time of approximately 2 minutes at 23 °C.
- Allow the adhesive to reach handling strength, approximately 5–7 minutes at 23 °C, before further work. Timing depends on temperature.
Accessories and additional information
- For application, use the Standard Dispensing Gun together with the Shubond Adapter.
- A mixing tip is required for correct mixing and application. Replace the tip once the adhesive inside it has cured.
- Adapter and mixing tips sold separately.
Please note: Exposed adhesive surfaces may remain slightly tacky after curing due to contact with oxygen in the air.
